Some Secret Truths About How to Put on a Car Seat Cover

“As an Amazon Associate I earn from qualifying purchases”

Car seats are essential for young children. They combine safety, convenience, and abiding by the law. Choosing a car seat and using it properly is at the top of the list of responsibilities for parents. Once the guardians have installed the car seat, a Certified Child Passenger Safety Technician (CPST) offers it a thumbs-up.

An infant car seat ensures safety from fatal accidents, and its cover protects kids from outside environments like harsh sunlight, no, rain, bugs, dust, etc. What is the benefit of this if you do not know how to put on a car seat cover? This quick guide will show you how to use a car seat cover for any car seat, as well as how to put it back on and bring those straps back to the back of the car seat! That’s the complicated part.

How to Put on a Car Seat Cover

How Do You Put on a Car Seat Cover without the Base?

This article will cover all steps to remove a car seat cover and put back them. You can follow these instructions on any infant car seat. These instructions are also applicable for booster car seats. We are going to mention the basic steps. You can put a car seat back on any car seat if you know the basic steps.

Removing Procedure

To remove a car seat cover, you need to remove the seat pad, infant head and body support, as well as strap cover. All these things are part of the car seat cover. You have to remove them step by step.

Body Support

The first task is to remove body support. To do this, you have to loosen the harness straps and undo the chest clip and crotch buckle. Then, pull out the body support.

Harness Cover

After pulling off the body support, remove the harness covers by undoing the attachments on the other side.

Seat Pad

Now, you have to remove the seat pad. You cannot remove it without opening the harness straps. Harness straps are locked from the back of the infant car seat. So, you have to flip over your infant car seat. If the handle disturbs you, simply adjust it. Some infant car seats have canopies. You need to change the canopy bar to ease your task.

Flip the car seat and remove the harness straps from the splitter plate. Flip the car seat back and pull the harness straps out. Now, move the handle and canopy. Their position should be vertical at a 90 degrees angle with the seat. Pull out the seat pad from the default way of canopy and handlebar.

When it is done, pull out the flaps from the front. The seat covers you use may have elastic instead of flaps. Both have the same procedure. Pull the straps and crotch buckles and remove the seat pad from the seat.

Send the parts of the cover for a great wash. Bring the cover after drying. Here the installing procedure begins.

Installing Procedure

You have already noticed that the harness and seat pad connection is quite complicated. So, keep in mind that the buckle and chest clip need to go back through the seat pad.

Seat Pad

While putting on the car seat cover, you have to start with the seat pad. You are right, from the complicated part. At first, you have to adjust the seat pad with harness straps. The straps that contain the buckle tongue in the chest clip will need to be threatened from the squat in the middle of the seat pad shown in the picture.

How to Put on a Car Seat Cover

Make sure there are no twists in harness straps. Now, put the crotch buckle through the squat shown in the following picture.


Also, pull the front adjuster web through the front slot of the seat pad.

Seat Pad

The marked areas are the holes where you have to thread the harness straps back. These wholes are called harness slots. You should use the slot based on your kid’s height and shoulder. And twists are not allowed again. Place the seat pad around the car seat. Adjust the handlebar and canopy bar to ease the task.

Flip the car seat cover to reattach the harness straps to the splitter plate.

Body Support

Installing the seat pad is done. Now, we are going to place the head and body support. Make sure the harness straps go in front of the support. Connect all the buckles and chest clips. If the harness feels loose, tighten it.

Harness Cover

Attach the harness cover with the harness. Installing the car seat cover is done finally. Make sure the harness straps are not twisted. Check it on the front and back.

You don’t need to learn how to put Joie car seat cover back on. The process is similar primarily we mentioned above.

Some Small Variations

Winter car seat cover or slipcover installation is different. Covers like Arcaro’s and Skip Hop car seat covers have other installation processes. These are called winter or slipcover. If you want to learn how to put on skip hop car seat cover, you can check our slipcover and canopy seat cover installation methods.

These covers are easy to install. Most of them are elastic covers and include a zipper. They also offer a headlamp so that you can block your child inside the car seat in winter to ensure sound sleep.

Final Verdict

We are pretty sure that you can put a car seat cover back on after following the instruction mentioned above. Someone can learn from you how to put back a car seat cover. Almost all seat cover installation systems are the same if certain types of covers are placed on the side. These specific types include nursing cover, slipcover and winter cover. But do you know an important fact?

Nursing seat covers and winter seat covers are crash tested. No manufacturer brands recommend using these car seat cover. If you use them and any accident happen, you cannot ask for a replacement which is a considerable disadvantage. After all, the infant car seat is a significant investment for your family. You can install the brand’s recommended car seat cover based on our giving procedure.