Graco Snugride 30 Infant Car Seat Review: An Ideal Car Seat for Babies

It is universally known that children are the apple of parents’ eyes. Therefore, it is absolutely necessary that they are kept safe from the moment of their birth. That also includes vehicle transportation. It is a problem that might give parents some headaches, as choosing the right infant car seat may seem simple, but it is not.

If you are a parent and you are looking for a car seat for your baby, and then search no more. For your child, the Graco Snugride 30 Infant Car Seat might be just what you were looking for, and more. What does this car seat have besides others? Reading further will provide the answer.

Graco Snugride 30 Infant Car Seat: An Overview

Capable of sustaining babies weighting between 4 and 30 pounds and having a height up to 30 inches, the Graco Snugride 30 Infant Car Seat fits perfectly your growing baby. In other words, you won’t need to buy another car seat for every pound or inch that your baby gains while developing. This 27 x 16.5 x 24.5 inches car seat is very easy to store, and easy to carry, as the weight of this car seat only 18.7 pounds and it has a carry handle.

The Graco Snugride 30 Infant Car Seat costs only 116.25 $ and comes in variety of colors like Metropolis, Forecaster and Carlisle. You can buy Graco Snugride 30 click connect infant car seat around 75$ from EBAY. Also, the car seat is designed to be compatible with any Graco Classic Connect stroller. Moreover, the Graco Snugride 30 Infant Car Seat has a top rating among consumer magazines and publications.

Graco Snugride 30 Infant Car Seat: Safety and Comfort

In order to be sure that the Graco Snugride 30 Infant Car Seat offers the best child safety standards, the car seat was tested for crashes. In that experiment, it was successfully proven that this car seat meets these standards. Not only that, but the car seat also provides comfort for your baby during vehicle transportation.

This particular car seat is designed to be placed rear-facing only and it is equipped with the necessary tools to do so. To explain further, the Graco Snugride 30 Infant Car Seat comes with a stay-in-car base, which means that you can install it in your car and leave it there, as the car seat is easily taken out or put in the base.

Additional car seats can be separately purchased. Moreover, the Graco Snugride 30 Infant Car Seat base has a LATCH system, which is designed to help you install the car seat into the car. And that is not all. For the base, there has a level indicator to make the installation easier.

If you are still in need of assistance when installing the car seat, the Graco Snugride 30 Infant Car Seat disposes of online videos. There you will get the proper installation process of the car seat.

Another important aspect of the Graco Snugride 30 Infant Car Seat is, it has a five-point harness. That harness allows you to easily get your baby in and out of the seat. In addition, the car seat is equipped with energy-absorbing foam, which allows the energies to be properly distributed in case of a collision. That means that your baby is entirely protected from injuries and death.

Your baby’s comfort is provided by a three-panel rotating canopy and a cozy seat cushion, which makes the Graco Snugride 30 Infant Car Seat perfect for a gentle and soft ride for your child.

Installation Process of The Graco Snugride 30 Infant Car Seat

In this part of the article, I am going to show you the basic steps of how to install a rear-facing Graco SnugRode 30 Car Seat using latch in the back seat of your car. Before installing your car seat, please always follow your car seat manual and your vehicle manual for complete instructions and information.

Before installing your car seat rear-facing, first, put your baby in the car seat. Adjust the harness so that the shoulder straps are in the slots at or below your baby’s shoulders. Then take your baby out of the car seat. This helps you to find the baby’s shoulder harness height before you install the car seat.

At first, I want to tell you about latch installation method. Latch stands for lower anchors and tethers for children. Make sure your vehicle is parked on level ground. Place the car seat base in the back seat of your car. Facing the rear of the vehicle the car seat base should sit firmly on your vehicle’s back seat. Hook the car seat basis lower anchor belts to the vehicles lower anchor points.

Make sure the belt lies flat and pull the cars seats lower anchor belt to make sure it is securely attached to the anchor points. Push down firmly on the middle of the car seat while tightening the lower anchor belt by pulling it. Place hands at the belt Pat and pull front to back and left to right to check for secure installation.

The car seat should not move more than one inch in any direction. If it does move more than one inch continue to tighten and retest until the movement is less than one inch. Check to make sure the level indicator shows only green. If not, unbuckle latch, remove the car seat and adjust the adjustable foot on the base. If additional leveling is required, place rolled towels under the car seat at the crease of the cars back seat until it is level and reinstall car seat using the latch.

Place your child in the car seat. Insert the buckle tongues into the buckle and connect the two halves of the chest clip. Tighten the harness to remove any slack. Adjust the chest clip to your baby’s armpit level and check the adjustment of the harness. It should be snug enough that you cannot pinch the harness. And if you already reviewed your owner’s manual then you are ready to go.

Cleaning Is Easy with The Graco Snugride 30 Infant Car Seat

Everything sounds good, and the Graco Snugride 30 Infant Car Seat definitely is one of the best when it comes to child safety standards in vehicle transportation. But as a mother, one of the first things that come to your mind is cleaning. And you are probably wondering whether or not the car seat can be cleaned easily.

You don’t have to worry to clean the seat. For the Graco Snugride 30 Infant Car Seat’s cushion is perfect for washing machines. What is more, the car seat parts that are made of metal or plastic can be cleaned using water, mild soap and a cloth. The same principle applies to the buckle, the difference being that you need only the cloth.

What People Say About The Graco Snugride 30 Infant Car Seat?

Reading the above lines clearly. That definitely helped you portray the image of your child happily riding in the car in the Graco Snugride 30 Infant Car Seat. To make things better, the majority of this car seat’s reviews are positive. Customers are pleased with the great quality for the price and the adaptability to their needs.

All the same, like every product available on the market, the Graco Snugride 30 Infant Car Seat cannot please every single customer. There are some complain that, if you have a tall baby, the car seat may become uncomfortable when it comes to getting your baby in and out of it. The straps are adjustable, but that may not be good enough.

Comparison with The Upgrade Version SnugRide 35

Graco Snugride 30 is an older version of the Graco SnugRide car seat. After that, a new version of Graco SnugRide was launched named Graco SnugRide 35. Let’s make a quick comparison between old and new version.

At first, we will check the same characteristics of both Graco SnugRide 30 and 35.

  • Safe and secure seat engineered.
  • Meets all surety standards.
  • Arm power protection.
  • EPS foam lining for better safety support.
  • Car seat base latch system.
  • User friendly design.
  • Canopy and 5 points safety harness.

Now, we will see the upgraded characteristics those are added in Graco SnugRide 35.

  • Where SnugRide 30 can load the weight up to 30 pounds, there SnugRide 35 can load up to 35 pounds. The highest height for SnugRide 30 is considered 30 inches, where SnugRide 35 is provided 32 inches.
  • In SnugRide 35, there are a pendulum level indicator and 6 recline positions. On the other hand, SnugRide 30 has no recline and a printed line indicator.
  • Graco SnugRide 35 has a larger sun canopy.
  • Graco SnugRide 35 is also upgraded and available in more difference color.

Graco SnugRide 30 is enough for your baby. If you want to add more features in your baby car seat, then you can go for SnugRide 35. But you will get the best and a same safety feature in both versions.

The Graco Snugride 30 Infant Car Seat: Conclusion

Once you have a baby, you want to offer him or her best protection, you can provide. Overall, the Graco Snugride 30 Infant Car Seat is great for your baby as it meets the child safety standards for vehicle transportation. It is comfortable and the price underlines the quality of this great baby car seat.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll to Top